| Customization: | Available |
|---|---|
| Type: | Normal Pressure Transmitter |
| Structure Type: | Strain Gauge Pressure Transmitter |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Tested Media | Wet Soil,Oil,Corrosive liquidand gas |
| Pressure type | Gauge pressure(G), Sealed pressure(S), Vent Pressure(V) |
| Full Scale Pressure Range | 0~105MPa,150MPa,200MPa ,300MPa |
| Supply Voltage | 10-32VDC |
| Output Signal | 4-20mA,0-5VDC,1-5VDC,0-10VDC,3mV/V |
| Non-Linearity | 0.04%FS |
| Repeatability | 0.04%FS |
| Combined Accuracy | 0.1%FS,0.2%FS,0.5%FS Alternative |
| Long-Term Stability | 0.1%FS/Year (representative value) |
| Operating Temperature | -43~85ºC/125ºC |
| Compensated Temperature | -25~70ºC/100ºC |
| Response Time | ≤1mSec(representative value) |
| Insulation Resistance | ≥500 MΩ/100V |
| Safety overload pressure | 200%FS(2 Times Full Range, special: 5 Times Full Range) |
| Rupture pressure | 500%FS(5 Times Full Range, special: 10 Times Full Range) |
| Shock Limitation | About 10g/0~2000HZ |
| Impact Resistance | About 50g/1ms |
| Connection | Chuck type seal or specified |
| Wetted Materials | 17-4PH stainless steel |
| Relatvie Humidity | 0~100% RH |
| Degree of Protection | IP67 |
| Electrical Connection | Aviation connector |
| Model PPM-T293A Pressure Transmitter | ||||||||||
| Code | Pressure type | |||||||||
| G | Gauge pressure | |||||||||
| S | Sealed pressure | |||||||||
| D | Differential pessure | |||||||||
| A | Absolute pressure | |||||||||
| Code | Pressure ranges | |||||||||
| M | 0~ X MPa | |||||||||
| K | 0~ X KPa | |||||||||
| P | 0~ X Pa | |||||||||
| Code | Accuracy | |||||||||
| 1 | ±0.5%FS | |||||||||
| 2 | ±0.25%FS | |||||||||
| 3 | ±0.1%FS | |||||||||
| 4 | 0.075% | |||||||||
| Code | Output signal | |||||||||
| V0 | mV | |||||||||
| A1 | 4~20mA | |||||||||
| V1 | 0~5V DC | |||||||||
| V2 | 1~5V DC | |||||||||
| V3 | 0.5~4.5V DC | |||||||||
| V4 | 0~10V DC | |||||||||
| A0 | Others | |||||||||
| Code | Operation temperature | |||||||||
| T1 | -10~70ºC | |||||||||
| T2 | -25~85ºC | |||||||||
| T3 | -30~125ºC | |||||||||
| T4 | -45~150ºC | |||||||||
| T5 | -10~175ºC | |||||||||
| T0 | Others | |||||||||
| Code | Power supply | |||||||||
| D1 | 5VDC | |||||||||
| D2 | 10VDC | |||||||||
| D3 | 24VDC(9-32)VDC | |||||||||
| D0 | Other | |||||||||
| Code | Process connection | |||||||||
| M1 | M20x1.5 | |||||||||
| M2 | M14 x1.5 | |||||||||
| M3 | M10x1 | |||||||||
| G1 | G1/4 | |||||||||
| G2 | G1/2 | |||||||||
| N1 | 1/4NPT | |||||||||
| N2 | 1/2NPT | |||||||||
| F0 | Other | |||||||||
| Code | Electrical connectiong | |||||||||
| W1 | Cable outlet | |||||||||
| W2 | DIN43650 | |||||||||
| W3 | Circular connector M12 x 1 | |||||||||
| Code | Other | |||||||||
| P1 | Commom | |||||||||
| P2 | Non-cavity diaphragm | |||||||||
){kind=link}