Manufacturer Ppm-S111A Dynamic Pressure Sensor for Engine Inlets

• Customization: Available
• Type: SemiConductor Strain Gauge Pressure Sensors
• Component: SemiConductor Type
• Model NO.: PPM-S111A
• For: Diffused Silicon Pressure Transmitter
• Output Signal Type: Analog Type
• Production Process: Integration
• Material: Stainless Steel
• Thread Type: M
• Wiring Type: Four-Wire
• Measuring Medium: Gas
• IP Rating: IP65
• Certification: CMC
• Customized: Customized
• Transport Package: Carton
• Specification: Stainless steel
• Trademark: CSPPM
• Origin: Chanhgsha
• Production Capacity: 50000 PCS/Year

Product Description

Description
The PPM-S111A pressure sensor is designed for hydrodynamics experiment which require small size sensor. It features high response frequency, stability, reliability.The precision of the micro pressure sensor is higher than the piezoelectric dynamic pressure sensor.

Application
engine inlets, chemical explosion test, tunnel, material, hydrodynamics, acoustics, civil engineering, rock-soil mechanics, hydraulic power mechanical test.

Specification

Measuring medium	Gas, liquid
Pressure type	Gauge pressure(G), Sealed pressure(S),Absolute pressure(A)
Measuring range	-100kPa~0~10kPa~1MPa~10MPa
Power supply	0.5-2.0mA,5-12VDC
Output signal	100mV(Typical value)
Transmitter output	Power supply:24VDC(±15VDC), Output signal:0-5VDC, 4-20mA
Nonlinearity	0.2% FS, 0.5% FS
Repeatability	0.05%FS
Accuracy	±0.2%FS, ±0.5%FS
Long-term stability	0.2%FS/year
Temperature	-40~85ºC
Response frequency	500kHz
Input impedance	5kΩ
Insulation resistance	>500 MΩ/100VDC
Overpressure	200%FS
Damage pressure	500%FS
Process connection	M5,M6 or others on request
Relative humidity	0~95% RH
Ingress protection	IP65
Electric connection	Cable outlet, connector

Dimensions in mm