| Customization: | Available |
|---|---|
| Type: | Resistance Strain Gauge Pressure Sensors |
| Component: | Mechanical Structure Type |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Measuring medium | Gas, liquid, steam |
| Pressure type | Gauge pressure(G), Sealed pressure(S), Absolute pressure(A) |
| Pressure range | 0~1MPa…10MPa…30MPa…40MPa…60MPa…70MPa…100MPa…120MPa |
| Power supply | 5VDC(3-12VDC) |
| Output signal | 0-10mV, 0-25mV(2mV/V, 5mV/V) |
| Nonlinearity | ≤0.02% FS, ≤0.04% FS, ≤0.05% FS |
| Hysteresis | ≤0.02% FS, ≤0.04% FS, ≤0.05% FS |
| Non-repeatability | ≤0.1% FS |
| Accuracy | 0.1%FS, 0.2%FS |
| Long-term stability | 0.1%FS/year |
| Medium temp | -40~125ºC/150ºC/175ºC/200ºC/250ºC |
| Operation temp | -40~+85ºC |
| Zero temp. drift | ≤0.005%FS/ºC, ≤0.01%FS/ºC |
| FS temp. drift | ≤0.008%FS/ºC, ≤0.015%FS/ºC |
| Response time | ≤1ms(10%~90%) |
| output impedance | 1500±50Ω,3300±50Ω,5500±1500Ω |
| Insulation resistance | ≥500 MΩ/100V |
| Overpressure | 200%FS (2 times FS) |
| Damage pressure | 500%FS (5 times FS) |
| Vibration resistance | 5~1000Hz |
| Shcok resistance | 50g, 20ms |
| Process connections | M10×1, or other process connections on request |
| Sealing method | Double sealing rings, sealing cone, end face sealing |
| Materials | Wetted parts: 17-4PH, 15-5PH Non-wettedparts: stainless steel 316, 1Cr18Ni9Ti |
| Ingress protection | IP65 |
| Electrical connections | Red-Power+, Black-Power-, Green-Output+, White-Output- |
| Model PPM-S315A Pressure Transmitter | ||||||||||
| Code | Pressure type | |||||||||
| G | Gauge pressure | |||||||||
| S | Sealed pressure | |||||||||
| D | Differential pessure | |||||||||
| A | Absolute pressure | |||||||||
| Code | Pressure ranges | |||||||||
| M | 0~ X MPa | |||||||||
| K | 0~ X KPa | |||||||||
| P | 0~ X Pa | |||||||||
| Code | Accuracy | |||||||||
| 1 | ±0.5%FS | |||||||||
| 2 | ±0.25%FS | |||||||||
| 3 | ±0.1%FS | |||||||||
| 4 | 0.075% | |||||||||
| Code | Output signal | |||||||||
| V0 | mV | |||||||||
| A1 | 4~20mA | |||||||||
| V1 | 0~5V DC | |||||||||
| V2 | 1~5V DC | |||||||||
| V3 | 0.5~4.5V DC | |||||||||
| V4 | 0~10V DC | |||||||||
| A0 | Others | |||||||||
| Code | Operation temperature | |||||||||
| T1 | -10~70ºC | |||||||||
| T2 | -25~85ºC | |||||||||
| T3 | -30~125ºC | |||||||||
| T4 | -45~150ºC | |||||||||
| T5 | -10~175ºC | |||||||||
| T0 | Others | |||||||||
| Code | Power supply | |||||||||
| D1 | 5VDC | |||||||||
| D2 | 10VDC | |||||||||
| D3 | 24VDC(9-32)VDC | |||||||||
| D0 | Other | |||||||||
| Code | Process connection | |||||||||
| M1 | M20x1.5 | |||||||||
| M2 | M14 x1.5 | |||||||||
| M3 | M10x1 | |||||||||
| G1 | G1/4 | |||||||||
| G2 | G1/2 | |||||||||
| N1 | 1/4NPT | |||||||||
| N2 | 1/2NPT | |||||||||
| F0 | Other | |||||||||
| Code | Electrical connectiong | |||||||||
| W1 | Cable outlet | |||||||||
| W2 | DIN43650 | |||||||||
| W3 | Circular connector M12 x 1 | |||||||||
| Code | Other | |||||||||
| P1 | Commom | |||||||||
| P2 | Non-cavity diaphragm | |||||||||
){kind=link}