Manufacturer Ppm-Tc1cl Intelligent Circuit Chec Instrument for Temperature Measurement

Product Description

PPM-TC1CL Intelligent Circuit Check & Measure Alarm Instrument applies to checking, measurement and alarm of 5~80 points process quantity. It is adapted to signals of Thermocouple, RTD, DC current, DC voltage sensors and re-transmitters.

1. Basic intrinsic error is less than 0.2%, indication range is -1999~9999.
2. The signal type, range, alarm value of each channel can be set separately.
3. Digital filtering time coefficient of each channel, which can improve anti-interference ability, can be set separately.
4. Zero and full scale correction, which can effectively reduce sensor error to improve measuring accuracy of the system, can be set separately.
5. Useless channels can be shut at will.
6. The 2nd grade parameter. The 2nd grade parameter is controlled by security code to prevent misoperation. Parameter copying function, which can greatly reduce workload of parameter setting, is also available.
7. Unique and practical alarm function, which is the connection to the LCU multiple controlling unit, can actualize alarm output of every channel.
8. Manual, timing, alarm start printing.
9. High-speed, high-efficiency communication interface can greatly reduce communication time.

 

	Code Description
	PPM-TC1CL-	8~80 channel;0.2% accuracy;measurement speed:10 times per second
Dimension		A	160×84×142            tapping:152×76
		B	84×160×142            tapping:76×152
		C	160×160×182           tapping:152×152
		D1	318×104×300 desktop type
		D2	318×104×300 tray use     tapping:312×96
Faceplate				2-bit LED(Channel number)+ 4-bit LED(Measured value)
Channels(Channels of A/B type ≤32;Channels of C,D1,D2≤80)				08	8 channels
				16	16 channels
				24	24 channels
				32	32 channels
				40	40 channels
				48	48 channels
				56	56 channels
				64	64 channels
				72	72 channels
				80	80 channels
Input Signal					R	All channels are RTD,Pt100,Cu100,Cu50,BA1,BA2,G53
					E	All channels are Thermocouple,K,S,R,B,N,E,J,T
					B	All channels are DC current signals((4-20)mA/(0-10)mA/(0-20)mA)Or DC voltage signals((0-5)V/(1-5)V). Notification of current or voltage signal channel is needed on order.
					X	Input signals are RTD and Thermocouple mix
					L	Input signals are RTD, thermocouple, 4mA~20mA,0mA~10mA,1V~5V,0V~5V mix. Notification of current or voltage signal channel is needed on order.
Alarm							Standard 2 points can be extended to 4 points. 250V AC/3A Resistive load
Communication Interface (Communication speed:2400,4800,9600,19200) (Communication address:0-99)							S1	TC ASCII RS232
							S2	TC ASCII RS485
							M1	Modbus-RTU RS232
							M2	Modbus-RTU RS485
Printing Function (Only for S1,S2 type)								P1	Fission Printing
								P2	Integrative Printing
Power supply									V0	100-240V AC 50/60 Hz
									V1	10-24V AC 50/60 Hz;10-24V DC